Eurogauge- Level switch
16704 Float Switch with 5m cable and tank adaptor
Adjustable Float Switch with 5m connecting cable and 1" BSP tank adaptor.
Float adjustable for close on liquid rise/open on liquid fall or close on liquid fall/open on liquid rise.
Voltage free contact.
Nivomag - Magnetic Float Level Switch
The NIVOMAG MK-200 series magnetic float level switches are used for point level detection of liquids in all types of vessels.
Operation without external power, side or top mounting, wide temperature ranges, various process connections, stainless steel wetted parts and Ex versions make it applicable in the chemical, pharmaceutical and oil industry etc. A permanent magnet operated by the float movement operates another magnet inside the switching enclosure. This second magnet operates a switch with volt free contacts.Standard Version, 316ti stainless steel construction, standard 92 x 92mm mounting flange and 202mm insertion length.
MLS 10 Paddle Switch
The MLS 10 is a low cost Paddle Level Switch, suitable for use on hoppers, bins and silos containing free-flowing granular and powdered materials such as sand, grain, animal feed stuffs, plastic granules or powders, etc.
In standard form the MLS 10 is suitable for side mounting into a 1½” BSP socket which should be located at the level at which an alarm signal is required.Extended shaft versions and special paddle type arrangements can be supplied on request.
The MLS 10 Paddle Level Switch is housed in a compact weather and dustproof enclosure and can therefore be used in most environments.
The MLS 10 has a slowly rotating paddle driven by a low power consumption motor, arranged such that when the free rotation of the paddle is impeded by material covering the paddle, a microswitch operates to give an alarm switching signal.Power to the motor is then disconnected by a second microswitch until material in the hopper drops away from the paddle.
The paddle will then start to rotate again and the signal microswitch switches back to the normal position.
ENT 7 Level Switch - Adjustable Flexible Probe
The ENT7 Capacitance Level Switch is intended for high or low level detection of free-flowing powders and granular materials in silos and hoppers etc.
The instrument is completely self-contained, requiring only a supply voltage and having a set of independent voltage-free changeover contacts for connection to external control equipment or alarms.
The unit operates on the principle of a changing electric field caused by the presence or absence of material around the probe. This change is used to operate the output relay. An internal Failsafe Switch offers the option of failsafe for either high or low level alarms, LED indicators show the state of the output relay. A multi-turn Sensitivity Control allows accurate adjustment of the switch point.The ENT 7 is suitable for top mounting into a 1½” BSP socket.
The 3 metre long probe is 6mm Ø PVC covered stainless steel flexible cable with an adjustable stainless steel weight assembly.
ELT 68C Conductivity Level Switch
The ELT68C is a self contained, all-in-one, conductivity level switch designed for the detection of conducting liquids and is capable of differentiating between dense layers of foam and the actual liquid surface.
The adjustment range of the ELT68C renders the unit also capable of interface detection between beer/water, milk/water, caustic/water, etc.
In standard form the unit is supplied with a PTFE partly insulated high grade 316 stainless steel rod electrode, 1000mm in length.24Vdc three wire operation.
An optional 316 stainless steel welding gland can also be supplied.