Flow Meter Solutions

Flowmeter > Electromagnetic Flow Meter Supplier
Electromagnetic Flow Meter UAE for accurate flow measurement

Electromagnetic Flow Meter

High-precision electromagnetic flow meter for conductive liquid measurement

Our electromagnetic flow meter provides accurate and maintenance-free flow measurement for a wide range of conductive liquids. Using Faraday’s Law of Electromagnetic Induction, it delivers stable performance without moving parts, making it perfect for applications with water, slurry, acids, chemicals, and other industrial fluids.

Widely used in chemical processing, water and wastewater treatment, food and beverage production, pharmaceuticals, and pulp and paper industries. Designed to operate reliably in demanding environments, it is available in both compact and remote display configurations for flexible installation and easy integration into existing process control systems.

Technical Specifications

Flow Range

0.3–10 m/s

Sizes

DN10–DN1200

Accuracy

±0.5%

Output

4–20 mA / Pulse / RS485

Power

24VDC / 220VAC

IP Rating

IP65 / IP68

Key Features

Compact or remote display
Zero pressure loss
PTFE or rubber linings
Multiple flange options
Instantaneous & totalized flow

Applications

Municipal water
Chemical dosing
Slurry monitoring
Beverage/dairy
Pharmaceutical
Talk to an Engineer

Installation Process

Follow our comprehensive step-by-step guide for safe and optimal installation of your vortex flow meter.

Step 1: Select Straight Run

Ensure minimum 10D upstream and 5D downstream straight piping for accurate vortex shedding and minimal turbulence.

Step 2: Mount Horizontally or Vertically

Install horizontally for gas/steam or vertically for liquids — ensuring full pipe conditions and proper flow direction.

Step 3: Gasket & Flange Alignment

Place gaskets between flanges, center the sensor, and tighten bolts evenly to avoid distortion or leakage.

Step 4: Electrical Wiring

Connect power, signal, and ground wires as per the terminal diagram. Shield cables to prevent signal interference.

Step 5: Set Parameters

Configure meter settings including media type, pipe diameter, unit of flow, and output signal (mA, pulse, HART).

Step 6: Test & Verify

Check for leaks, verify readings with process conditions, and ensure stable vortex signal output under full flow.

Frequently Asked Questions

Electromagnetic flow meters are ideal for conductive fluids like water, wastewater, slurries, and industrial chemicals.
No. Non-conductive fluids cannot be measured. The fluid must have minimum electrical conductivity to function correctly.
Minimal. These meters have no moving parts, requiring only periodic cleaning of electrodes in harsh environments.
Yes. The meter can be installed in any orientation as long as the pipe remains full and the electrodes stay submerged.
Factory calibration is usually sufficient, but recalibration may be needed for high-precision or regulatory environments.

Certifications

Trusted for quality and compliance. Our flow meters adhere to international standards for performance, safety, and environmental impact.

ISO 9001

Certified Quality Management

IP65 / IP68

Ingress Protection Rating

RoHS

Restriction of Hazardous Substances

CE Mark

European Safety Compliance