Flow Meter Solutions

Flowmeter > Oval Gear Flow Meter Supplier
Oval Gear Flow Meter UAE

Oval Gear Flow Meter

Precise Volumetric Measurement for High-Viscosity Fluids

Oval gear flow meters are positive displacement meters ideal for measuring the volume of thick, viscous, or caustic liquids with high accuracy. Their unique gear mechanism ensures minimal slip and consistent performance.

Suitable for petrochemicals, paints, lubricants, adhesives, and other specialty fluids, they are built to withstand challenging conditions and deliver long-term precision. Their compact, corrosion-resistant designs make them highly adaptable.

Technical Specifications

Flow Range

0.5 – 1000 L/min

Pipe Sizes

DN4–DN100

Accuracy

±0.5% of reading

Fluid Temp

-20°C to 120°C

Power Supply

Battery / 24VDC

Protection

IP65 / IP67

Key Features

Positive displacement principle for high accuracy
Suitable for viscous fluids like oil, fuel, and chemicals
Battery-powered models for remote locations
Linear output without need for flow conditioning
Easy installation and maintenance

Applications

Lubricating oil metering
Fuel dispensing systems
Chemical dosing in process plants
Food and beverage filling lines
Hydraulic fluid measurement
Talk to an Engineer

Installation Process

Follow these steps to ensure a precise and efficient installation of your oval gear flow meter.

Step 1: Choose Location

Select a location with stable, bubble-free liquid flow. No need for long straight runs due to positive displacement design.

Step 2: Mount Horizontally or Vertically

Install in horizontal or vertical orientation depending on fluid type and manufacturer’s guidance.

Step 3: Connect Piping

Use compatible flanges or threaded ends. Ensure seals are tight and free from leaks to maintain accuracy.

Step 4: Electrical Connection

Connect the signal output (pulse, 4–20mA, or Modbus) and power source per wiring schematic.

Step 5: Prime the Line

Ensure the line is completely filled with liquid. Remove any trapped air to prevent false readings.

Step 6: Verify Output

Check real-time flow output against a known standard. Adjust calibration factor if necessary.

Frequently Asked Questions

It’s a type of positive displacement flow meter that uses two rotating oval gears to accurately measure the volume of liquid passing through the meter.
Oval gear meters are ideal for measuring clean, viscous fluids such as oil, fuel, chemicals, and food-grade liquids.
Yes. The meter should be installed according to the flow direction marked on the body to ensure accurate readings.
No. Unlike many other flow meters, oval gear meters do not need long upstream or downstream straight pipe lengths.
Oval gear meters have minimal maintenance needs. However, periodic cleaning and inspection are recommended for optimal performance.

Certifications

Trusted for quality and compliance. Our flow meters adhere to international standards for performance, safety, and environmental impact.

ISO 9001

Certified Quality Management

IP65 / IP68

Ingress Protection Rating

RoHS

Restriction of Hazardous Substances

CE Mark

European Safety Compliance