Flow Meter Solutions

Flowmeter > Turbine Flow Meter Supplier
Turbine Flow Meter UAE

Turbine Flow Meter

High-Speed Accuracy for Clean Liquids and Gases

Turbine flow meters are widely used for measuring the flow of clean, low-viscosity fluids like fuel, oil, and water. The internal rotor spins in proportion to the fluid velocity, enabling high accuracy and repeatability.

Known for their fast response times, turbine meters are ideal for batch processes, dosing systems, and energy applications. They come in various configurations including axial, paddlewheel, and propeller designs depending on the media and installation needs.

Technical Specifications

Flow Range

0.03 – 850 m³/h

Pipe Sizes

DN15–DN300

Accuracy

±0.5% of reading

Fluid Temp

-20°C to 120°C

Power Supply

3.6V battery / 24VDC

Protection

IP65 / IP67

Key Features

High accuracy for clean liquid measurement
Fast response with low-pressure drop
Compact size and lightweight
Battery or loop-powered options
Optional temperature and pressure compensation

Applications

Fuel and oil flow monitoring
Process industries
Beverage and brewing
Chemical dosing
Clean water and solvent measurement
Talk to an Engineer

Installation Process

Ensure precise and efficient installation of your turbine flow meter by following these essential steps.

Step 1: Select a Proper Location

Choose a horizontal pipe section with a full pipe condition. Avoid locations with vibration or high electromagnetic interference.

Step 2: Ensure Straight Run

Maintain minimum 10D upstream and 5D downstream straight pipe runs to stabilize flow profile for accuracy.

Step 3: Mount the Flow Meter

Install the turbine meter in line with the flow arrow pointing in the correct direction. Avoid tilting the sensor body.

Step 4: Sensor Alignment

Ensure proper centering of the turbine rotor. Misalignment can cause measurement errors or rotor wear.

Step 5: Electrical Connection

Connect signal cables to the transmitter following wiring diagrams. Shielded cables are recommended to prevent noise.

Step 6: Calibration & Start-Up

Power on the device, enter calibration values or K-factor, and verify correct readings through your control system.

Frequently Asked Questions

Turbine flow meters are ideal for clean, low-viscosity fluids such as water, fuels, solvents, and oils.
Specialized turbine flow meters are available for gas and steam, but standard models are primarily for liquid applications.
Periodic cleaning and inspection of the rotor and bearings are needed, especially in applications with particulates.
Yes. For optimal accuracy, it’s recommended to install with 10D upstream and 5D downstream straight runs.
The K-factor defines the number of pulses per unit volume. It is used for calibration and ensures accurate flow conversion.
Yes, but horizontal installation is preferred. For vertical installation, flow direction should be upwards to ensure rotor stability.

Certifications

Trusted for quality and compliance. Our flow meters adhere to international standards for performance, safety, and environmental impact.

ISO 9001

Certified Quality Management

IP65 / IP68

Ingress Protection Rating

RoHS

Restriction of Hazardous Substances

CE Mark

European Safety Compliance